Conical screw vacuum drying equipment is particularly suitable for drying toxic and harmful products containing solvents or water, due to its closed design and indirect heating of the product, to a very low moisture content.
Due to its unique, very gentle mixing properties, even mechanically sensitive products are not destroyed; this vacuum dryer is reproducible during the drying process and has good product quality of the initial product, while the required driving force is very low . A high vacuum is achieved, ensuring lower drying temperatures (obvious advantages when drying temperature-sensitive products), good heat transfer performance, and short drying times, while requiring very little energy at the same time. Short drying times and high levels of fully enclosed systems make conical dryers the best choice where environmental and/or product requirements are stringent.
Directly mounted filters retain dust particles in the process space, full discharge and easy output ensure you can continue to process your valuable product without loss. Not only solids, but also humidity and solvents can be recovered by the vacuum unit, which has been incorporated into a closed control system.
The inner conical screw and agitation use a rotating system, the self-standing mixing screw, attached to the upper rotating rotating arm, so that it follows the container wall as far as possible, thus ensuring dense but gentle mixing of powders and other, comparable to bulk goods.
https://www.stardrying.com/
