News

The original shape of the material: particles, powders, particles, sludge, crystals, liquids, pastes, suspensions, solutions, continuous flakes, thick plates, irregular materials (small or large), ...

Rice is the most important crop for urban and rural residents in my country. In normal years, my country’s annual output of rice is about 200 million tons. The rich rice resources provide an import...

According to the heating method, the dryer is divided into convection, conduction, radiation, dielectric and other types. Convection dryer, also known as direct dryer, uses hot drying medium to dir...

Modern dryers began to use fixed-bed dryers with intermittent operation. In the middle of the 19th century, the use of tunnel dryers marked the development of dryers from intermittent operation to ...

For example, drying of wood before making wooden molds and woodware can prevent product deformation, and drying of ceramic blanks before calcination can prevent finished products from cracking.

A mechanical equipment that uses heat energy to reduce the moisture of materials and is used to dry objects. The dryer vaporizes and escapes the moisture in the material (generally refers to moistu...

The drying speed is fast, and the surface area of the material liquid is greatly increased after atomization. In the hot air flow, 95%-98% of the water can be evaporated in an instant, and the time...

The drying speed is fast, and the surface area of the material liquid is greatly increased after atomization. In the hot air flow, 95%-98% of the water can be evaporated instantly, and the drying t...

It mainly sprays air or water vapor from the nozzle at a high speed, and separates the material liquid into fine droplets by friction, so that it is in full contact with the hot air to form heat ex...

The machine adopts a fully enclosed form, all parts are made of stainless steel, equipped with a three-stage purification device, and the filtered air reaches the level of 100,000.

The working process of this unit is that the material liquid is input through the diaphragm pump under high pressure, spraying mist-like droplets, and then falling in parallel with the hot air.

High-speed centrifugal spray drying is the most widely used process in the liquid process shaping and drying industry.