1. Eliminate the influence of mechanical impurities as much as possible. Mechanical impurities refer to sedimentation or suspension in materials, such as sand, dust, iron filings, fibers and some insoluble substances. The retention of these impurities inside or on the surface of the high-speed centrifugal spray dryer will lead to pipeline blockage, accelerated corrosion, reduced lubrication effect, and increased wear and tear of parts and other problems. Therefore, it is necessary to conscientiously do a good job in cleaning and sanitating the environment in which the high-speed centrifugal spray dryer is used, and use qualified lubricating oil and supporting parts.
2. Control the humidity of the environment. Corrosion occurs when the metal parts of the spray dryer come into contact with the electrolyte. Excessive air humidity in the storage environment of the high-speed centrifugal spray dryer will accelerate the corrosion rate, damage the workpiece and shorten the service life. In the work, we must strictly control the humidity of the environment where the high-speed centrifugal spray dryer is used, and avoid using and storing the high-speed centrifugal spray dryer in a humid environment.
3. Control the ambient temperature. Any high-speed centrifugal spray dryer has its suitable working temperature. When the ambient temperature deviates from the suitable temperature for mechanical work, it will not only affect the working efficiency and quality of the high-speed centrifugal spray dryer, but also cause fatigue of parts and aggravate wear. During the work, appropriate measures should be taken according to the working temperature range of the dryer and its components to ensure that the dryer is in a suitable temperature environment. Recommended reading: Factors to consider when choosing a spray dryer supplier
https://www.stardrying.com/
