Large spray dryers generally require power, but will fail when plugged in. Once a failure occurs, it needs to be powered off and shut down, because it is prone to safety problems after a long-term failure. So, what kind of failures generally occur and need to be stopped?
1. The feeding equipment fails.
2. Found serious cracks in the drying chamber of the spray dryer.
3. When the fuel is cut off, when the feed is cut off, our spray dryer will stop supplying hot air, and will be shut down at this time.
4. The heating is not controlled, and the heat is higher than 300 ℃.
5. The reducer and motor have irregular vibration or noise, and the phenomenon of heating occurs.
https://www.stardrying.com/
