Usually, the low-temperature spray dryer used by the operator can be directly set on the interface. According to the human transmission and conversion, it can realize data collection and fully automatic control and monitoring. The data obtained by the low-temperature spray dryer is very accurate, but the prerequisite for ensuring the accuracy of the data is the need to pay attention to the operation of the entire process.
Precautions for operation of low temperature spray dryer
1. Turn on the fan first, and then turn on the heater. Turn off the heater before stopping the machine, and turn off the fan after the temperature is lower than 60°C, so as to prevent the equipment from burning some tissues when it is suddenly turned off.
2. The operating function part needs to be protected. In other words, when the fan is not turned on, the switch of the heater cannot be completely turned on, so it is necessary to pay attention to its switching sequence, and it cannot be reversed, otherwise the service life of the equipment will be shortened. .
3. When the protection function of the equipment is turned on, if the temperature exceeds 60°C, the switch of the fan cannot be turned off, so the protection function must be turned off before turning off the fan.
4. When the equipment fails and the protection function is activated, the frequency conversion alarm of the fan will sound. At this time, the heater will automatically shut down and cannot be opened. A thorough inspection is required until the alarm is released before further work can be carried out.
https://www.stardrying.com/
