Projects

The tray continuum dryer is a multi-layer fixed hollow heating disc (also known as the carrier plate) and rotating harrow mixing , Vertical continuous drying device based on conduction.

At present, a variety of vacuum dryers have been developed. They have many advantages, so vacuum dryers are increasingly widely used. Let's take a look at the advantages of vacuum dryers together.

The materials are evenly dried; avoid oxidation and overheating; products with extremely low moisture content can be obtained, which can be packaged without crushing operations.

Enhanced convection drying with mechanical stirring, high heat transfer coefficient per unit volume. Fine powder products can be obtained from viscous paste, mud, and filter cake materials at one time

The selection of the dryer is a process affected by many factors. The following will give a comprehensive but simple introduction to the various factors that affect the selection of dryer equipment.

When the heating temperature is constant, increasing the vacuum degree can increase the drying speed.

The vacuum dryer should be used in an environment where the relative humidity is H, there is no corrosive vacuum dryer gas around, and there is no strong vibration source and strong electromagnetic fi

The number of revolutions of the screw conveyor of the dryer feeder is controlled by an inorganic speed-regulating motor. Control the feeding speed according to the material properties and drying proc

There are many types of drying equipment and a wide range of applications. It can be said that all aspects of life have the shadow of dryers, especially in industrial production, it is inseparable fro

Spray-dried foods can be divided into two categories: non-sticky and sticky. Non-sticky food materials are easy to spray dry. The design of the simple dryer and the final powder can flow freely. Examp

The centrifugal atomizer of the spray dryer is required to work stably at high speed. Therefore, the flange surface of the atomizer on the upper part of the tower must be kept level, and a rubber flan

During the operation of the spray dryer, in order to effectively ensure the cleaning of the pipes and all the parts in contact with the finished product, the best products can be obtained during use,