Projects

In order to meet the market demand, improve the solubility, adjustability and packaging performance of the product. Some spray drying equipment adds granulation equipment, but increases thermal denatu

Large spray dryers generally require power, but will fail when plugged in. Once a failure occurs, it needs to be powered off and shut down, because it is prone to safety problems after a long-term fai

Spray drying is a method in which systems technology is applied to the drying of materials. After atomizing the material in the drying chamber, in the contact with the hot air, the moisture evaporates

The device has a stainless steel design, is compact and does not require any accessories, as well as a nozzle cleaner. It will be automatically cleared when it is blocked. Of course, there will be som

A spray dryer is a device that can complete drying and granulation at the same time. According to the process requirements, the pressure, flow rate and nozzle hole size of the liquid pump can be adjus

According to different production requirements, the dryer body can be made of A3 steel plate or A3 steel plate with 1Cr18Ni9Ti stainless steel plate or 1Cr18Ni9Ti stainless steel plate inside. The wal

The boiling dryer uses air heated by a heat exchanger to form hot air that is distributed through the valve plate and enters the host. The wet material enters the dryer from the feeder. Due to the win

Rake vacuum dryers have been successfully used in fine chemicals, pesticides, organic chemicals and other industries. In terms of drying time, solvent recovery and thermal efficiency, the use of the n

The wet material is continuously added to the drying plate on the first layer of the upper part of the dryer from the feeder, and the rake arm with the rake leaves rotates to make the rake leaves cont

If the spray dryer is running for a long time or due to improper operation, aggregates will appear in some spray granulation dryers and affect normal operation. At this time, it is necessary to stop w

The principle of the vacuum rake dryer: the material to be dried is added from the top of the shell in the middle, and under the stirring of the rake teeth that are constantly rotating forward and bac

If the vacuum dryer is not used for a long time, wipe the exposed electroplated parts and apply neutral grease to prevent corrosion, and put on a plastic film dust cover, and place it in a dry room to