PVC milk is a material commonly used in our daily life, and it will become a raw material for the pump industry. It can be dried with a spray dryer.
Spray dryer is one of the main products of our company. Our company has many innovations in the design of spray drying equipment and widening the range of spray dryers. If you need spray drying, please contact us, our company is equipped with experimental spray dryer.
When processing polyvinyl chloride milk, first form a slurry with water, and atomize it with an atomizer until it is made into a dry powder. The spray-dried polyvinyl chloride emulsion evaporates quickly while ensuring that the droplet temperature is low, and the material quality will not be greatly affected. In the design of the spray drying equipment, the waste gas utilization rate is very high, and a large part of energy is saved.
It is feasible to use a spray dryer to process PVC milk, and fluidized bed drying equipment is required to meet the requirements of high yield. The fluidized bed dryer is used as a thick layer drying equipment. After spray drying, the material is granular, with high moisture content and low temperature. Will. The material is sent to the fluidized bed dryer for drying. The purpose is to increase the thermal efficiency and make the product dry quickly to meet the moisture content requirements.
Obtaining a spray dryer and a fluidized bed dryer is beneficial to the drying of our polyvinyl chloride milk, and the overall energy consumption has been reduced by 20%.
https://www.stardrying.com/
