Projects

The design of our spray dryer is advanced in the country and in the world. If we compare the important parameters of our spray dryer with some world famous brand spray dryers, such as moisture content

As technology continues to advance, spray dryer technology has improved and manufacturers have made improvements to the internals of the machine. Therefore, it is widely used in the pharmaceutical ind

The vacuum dryer should be used in an environment where the relative humidity is less than or equal to 85% RH, there is no corrosive vacuum dryer gas around, and there is no strong vibration source an

If you operate according to the procedure of heating first and then vacuuming, when the heated air is pumped out by the vacuum pump, the heat will inevitably be brought to the vacuum pump, which will

Pay attention to the forward and reverse operation. After the equipment is turned off, wait until the motor does not rotate before controlling the forward and reverse rotation, otherwise the motor wil

The vacuum dryer should be used in an environment where the relative humidity is less than or equal to 85% RH, and there is no corrosive gas around, no strong vibration source and strong electromagnet

Vacuum dryer is used for dehydration and drying of high value-added and heat-sensitive agricultural and sideline products, health products, food, medicinal materials, fruits and vegetables, chemical r

The drying principle of the vacuum dryer is to use the principle of lowering the evaporation point of water under low pressure, so that the moisture in the raw materials can be quickly evaporated to a

Although resin dryers are often referred to as "auxiliary" equipment, the decision on which type to choose can potentially lead to a plastics processing business strategy. By abandoning the traditiona

The vacuum dryer is composed of a refrigeration system, a vacuum system, a heating system, and an electrical instrument control system.

First turn off the steam heating and the electric heater to cool down, and also turn off the feed pump (screw pump) to cool down. When the inlet temperature drops to 90°C, it will be turned off. The a

Record the parameters of the process high-speed centrifugal spray dryer once an hour and the current of the equipment required by the owner, and make production records carefully.