Projects

Turn on the centrifugal fan and check the operation of the fan equipment: whether there is vibration, abnormal sound, odor, etc. of the high-speed centrifugal spray dryer, whether the temperature of t

Whether the pipe connection is installed with sealing material and then connected to ensure that unheated indoor air does not enter the drying chamber.

Buying a suitable small spray dryer is more critical to the future use of the laboratory. The purchase and key points of a small spray dryer are summarized for your reference!

The double cone rotary vacuum dryer is suitable for the concentration, mixing and drying of powdery, granular and fibrous materials in the chemical, pharmaceutical, food and other industries, as well

Static vacuum dryer trays should be completely interchangeable. All 12 pans should make exactly the same. Any one can then fit into any of the 12 possible positions which would make loading easier. Th

Conical screw vacuum drying equipment is particularly suitable for drying toxic and harmful products containing solvents or water, due to its closed design and indirect heating of the product, to a ve

It adopts closed dehumidification and drying method, no waste gas and waste heat emission, no noise pollution, and is a high environmental protection product;

I believe that many people are not very clear about the difference between vacuum dryers and ordinary ordinary dryers. Let's talk about the difference between the two. First of all, they are commonly

If you operate according to the procedure of heating first and then vacuuming, when the heated air is pumped out by the vacuum pump, the heat will inevitably be brought to the vacuum pump, which will

The energy shortage has attracted worldwide attention. The traditional idea is that the energy consumption of the vacuum dryer is high, because it needs to add a vacuum pump. But I haven't seen the re

Small spray dryer refers to atomizing the liquid to be dried into tiny droplets through the atomizer in the drying chamber, and directly contacting and mixing it with the drying medium hot gas to evap

In the daily production process, the necessary preparations should be carried out before starting the equipment. Check whether the joints of the bearings and sealing parts of each device are loose, th